Lanser Supply is a supply network partner for custom CNC machined parts. We match your drawing to vetted production floors and own inspection and delivery end to end — from a single prototype to volume production, holding tolerance and reporting it per shipment.

80+ machines — organized by the problem they solve

We don’t list machines for show. Each one exists to handle a non-standard job others pass on. Here is the floor, grouped by the hard part it takes.

① Oversized, one-piece bases

② Long shafts & spindles

③ Complex geometry, one setup

④ Precision surfaces & proof

Watch the machines run

Real footage from our audited network — the machines at work, not staged photos.

CNC machining that covers the full path

We coordinate CNC capacity across a vetted network so your part is made by the right process, not just the nearest machine:

• 3-, 4-, and 5-axis milling for complex geometry and tight tolerances
• CNC turning for round, concentric, and threaded components
• 5-axis & complex geometry — compound angles and undercuts cut complete in one setup
• Grinding & surface finishing — flat to 0.002 mm, parts up to 3 meters
• Large-format gantry machining (up to 6 meters) for one-piece non-standard bases and long shafts to 11 m — parts others cannot fixture
• Tight-tolerance work verified on coordinate measuring machines, with a report per shipment

Where we add the most value

Materials we run routinely

Common machining stock we handle on a regular basis:

• Aluminum alloys — structural brackets, enclosures, automation parts
• Stainless steel — 304 / 316 class and precipitation-hardened grades for durable, corrosion-resistant components
• Engineering plastics — POM, nylon, and PEEK where the application calls for it
• Brass, copper, and other common stock for conductive and decorative parts

Material certificates and certificates of conformance travel with the order on request.

By application

We support buyers across industrial and commercial equipment:

• Automation & industrial equipment — frames, brackets, fixtures, manifolds
• Consumer electronics — enclosures, housings, connectors, brackets
• Automotive components — non-safety-critical structural and functional parts
• Robotics & fixtures — repeatable, alignment-critical components

Tolerances & inspection

We hold tight tolerances and verify every critical dimension on a CMM, with a report issued per shipment — not a one-time sample photo. Incoming material, in-process setup, and final inspection are documented so you can confirm what actually arrived.

DFM up front

Before metal is cut, we review your drawing for manufacturability and tell you straight if the tolerance, material, or geometry can be improved. Early DFM feedback typically saves more than a marginally lower unit price later, especially for low-volume and prototype work.

From prototype to volume

The same engineering and production team carries your part from first article to production — no re-qualification, no new baseline. That matters for low-volume manufacturing, bridge production, and parts where assembly and fit must be validated, not just individual components.

When the part doesn’t fit a standard fixture

Our non-standard manufacturing capability — including a 6-meter gantry — handles one-piece bases and oversized structures others turn down. See how we work and why our floors are verified. For hardened detail and fine internal features, our wire EDM works alongside CNC and grinding.

Send a drawing, get a clear quote

Send your drawing and we come back with a clear quote and a DFM note, usually within 24 hours.

Related: Assembly · Casting & Forging